2020 New Product Lineup

Desert Tech is really excited to announce the new product lineup for 2020.  We have new rifles, new caliber conversion kits, new accessories and new calibers being offered by Desert Tech Munitions. Contact us at (801)975-7272 or visit your local Desert Tech Dealer to place your order now!

Ratchet

Our new Ratchet Compensator $95.99, was designed with one goal in mind, to maximize muzzle control.  We achieved this by substantially reducing recoil more than 50% and keeping the barrel position neutral while shooting.  This muzzle brake provides maximum control without blasting gases back into your face.

The ratchet utilizes a two port break design with a small port at the 12 o’clock position precisely sized to vent just enough gas upwards to eliminate muzzle rise, keeping the barrel level without forcing the muzzle down.  Muzzle neutrality is the key feature of the new Ratchet Compensator.

As a side benefit the Ratchet is compatible with Strike Industries Oppressor which is a blast deflector that installs over the Ratchet Compensator.  Ratchet Compensators have standard thread pitch muzzle threads so customers can install them on their other rifle systems (1/2-28, 5/8-24).

We have dedicated compensators for 5.56/.223, .308 win, and 6.5 Creedmoor. We wanted tuned muzzle neutrality on all three cartridges.  The compensators will be sold individually and all future MDRX rifles will come with the new Ratchet Compensators pre-installed.

MDRX

This is the new MDRX rifle starting at $2,099.98, the X stands for extreme. We have upgraded the polymer resin to better withstand high impact falls, we have also improved gas block drainage to ensure maximum reliable performance in water and mud submersion testing.  The trigger pull and creep have been reduced to allow for more accurate shooting capability. For those of you who are looking for better performance downrange, you’ll be happy to know that we are now offering 20″ barrels and conversion kits and because the MDRX is a bullpup it is still extremely mobile and compact.

This is the new MDRX SE rifle starting at $1,889.98, SE stands for side eject.  We received several requests for a traditional side ejection MDR because users wanted the ability to quickly safety check the chamber without needing to remove the forward ejection chute.

The forward ejection mechanisms weigh more than 1/2 LB and they are the most expensive mechanisms to produce on the MDRX rifle.  Creating traditional side ejection allowed us to reduce the rifle weight to 7.8 LBS and reduce the price too. The MDRX-SE, side ejection rifle, is only available in 5.56/.223 rem caliber at this time.

The side ejection can be converted from left to right hand ejection by removing the Allen screw and flipping the bolt head 180 degrees in the bolt carrier.  We have also installed a sealing gasket under the face panel to eliminate all gas leakage into the shooters face when firing suppressed.

The MDRX-SE can be converted to a forward ejection rifle by purchasing an MDRX conversion kit and forward ejection kit.  MDR & MDRX rifles can be converted to side ejection rifles by purchasing an MDRX-SE conversion kit and side ejection kit.

This is the new MDRX Compliant rifle starting at $2,159.98.  The compliant rifle qualifies as a featureless rifle to allow legal ownership in California and the District of Columbia.  The Compliant rifles come with 20” barrels, our new Ratchet compensator, a 10 round magazine, and a shark fin that is attached to the grip of the rifle.  They will be available in 6.5 Creedmoor, .308 Winchester, and .223 Remington.

This is our new MDRX 6.5 Creedmoor conversion kit $719.99 with a 20” barrel.  The 6.5 Creedmoor is taking the precision rifle world by storm and for good reason. The 6.5 Creedmoor dominates the .308 Win in range and wind resistance and it is extremely soft shooting.

6.5 Creedmoor conversion kits are available for both MDR and MDRX rifles.  The 6.5 conversion kit uses the same bolt, magazine, and ejection chute as the 308 MDR/MDRX rifles so if you already have a .308 win all you will need is the barrel assembly, and it will drop in making it an easy and fast swap for 308 owners.

This is the MDRX .300 Blackout conversion kit $599.99. The .300 Blackout is phenomenally fun to shoot suppressed with subsonic ammunition.  It is Hollywood quiet and has virtually no recoil.  This rifle will fire supersonic and subsonic ammunition in both suppressed and unsuppressed fire modes.  The gas settings are clearly marked to ensure users can accurately set the gas with confidence.

The .300 Blackout comes with a newly designed gas valve that allows easy adjustment, through the handguard cutout, without the need to remove the handguard.  The .300 Blackout will be available as a rifle or conversion kit.

Ammunition

We now offer New Match .300 Norma Magnum starting at $99.95 per box (20 rnds), ammunition from Desert Tech Munitions. It’s loaded with the 230 grain Sierra matchking to deliver sub-½ moa performance with an ultra high ballistic coefficient of 0.8.  The .300 Norma Magnum outshined the .338 Lapua Magnum in the ASR military program due to its superior accuracy, reduced recoil, and flatter trajectory.

We now offer New Match .338 Norma Magnum starting at $99.95 per box (20 rnds), ammunition from Desert Tech Munitions. It’s 250 grain Lapua Scenar delivers sub-1/2 moa performance with an ultra-high ballistic coefficient of 0.648.  The .338 Norma Magnum nearly matches the performance of the .338 Lapua Magnum but in a more efficient cartridge casing which improves accuracy and consistency shot to shot.

We now offer our New Match .408 CT ammunition commercially starting at $74.95 per box (10 rnds), we have been supplying it to international military clients for years and we have decided to make it available commercially in 2020.  The .408 uses a 400 grain bullet that’s sub-moa accurate and sports a very high BC of 0.983!

SRS-A2

Introducing our new SRS-A2 Conversion Kits. We are adding 300 Norma Mag and 338 Norma Mag to our list of caliber conversion kits for the SRS-A2. The 300 Norma Magnum  outshined the 338 Lapua Magnum in the ASR Military program due to it’s superior accuracy, reduced recoil, and flatter trajectory. The 338 Norma Magnum nearly matches the performance of the 338 Lapua Magnum but its more efficient cartridge casing improves the accuracy and consistency shot to shot.

For a limited time only we will be offering two new hunting calibers, 7mm Remington Magnum and 300 Win Mag. These conversion kits sport a hunting profile barrel making them lighter than our standard conversion kits and easier to pack on a hunt.

All of these new products are available to order now, and we will start shipping the first batches the week of shot show and the week following shot show.  The new items will be uploaded to our website between now and shot show, until then you can call your local desert tech dealer or contact desert tech directly to place your orders.

We will have one more new product to show off at shot show so make sure you visit out booth# 16945.  Thank you for supporting Desert Tech and the 2nd amendment.  We want to wish you all a happy new year and hope to see you at Shot Show!

Order yours today!!!

59 thoughts on “2020 New Product Lineup”

  1. It says the trigger pull & creep have been reduced for the MDRX. What could an owner of a 2019 pattern MDR do to get that upgrade? Is it a drop in fire control group or have you re-designed the transfer bar system as well. I am a trigger snob and have always felt if my MDR had a better trigger it would be the perfect rifle. Thanks!!

      • Hi
        I have a MDR I’m looking to buy. Current set up is in 308.
        Side note, it has a gas block with only 3 options – is there an upgrade?
        If I buy the Mdr in 308, I would be purchasing a conversion kit for 300 blackout.
        So I’m clear, please tell me what I need to buy to have this conversion complete – do I simply buy the kit for $600 (approx) on your website?
        I’m just concerned I won’t be purchasing all necessary parts to make conversions complete. Finally, although I have a 6.5 now, it’s on a 26” barrel. I’d like to have the 6.5 shorter too. That is an awesome round!
        Thanks!

  2. I entirely agree with Jim. My shooting position would change dramatically if I had to use the short rail system in the current MDR family. I want to get my support hand further out than I can with the current design. Frankly, its what’s holding me up on buying one. Are any other manufacturers making rail systems for these guns?

    • I’d love to see the larger handguard on the 20″ to accommodate an over-barrel suppressor, but I’m surprised the difference in weight doesn’t help out with the short rail. I’m way more accurate the closer my support hand is.

  3. Also, I’m wondering on the timeline for the side-ejecting .308. The forward ejecting system is cool and all, but not worth the extra money IMO. Plus, I assume the sealed side of the side-eject model is less gassy when suppressed than the forward-ejecting one.

      • The SE seems to be a great upgrade for the MDR line. I’m contemplating an SE or .300 BLK purchase. If the SE line can add more calibers, I think it would be the most compelling combination on the market. Crossing my fingers that this year has some more surprises from you guys. Thanks.

  4. So I have been reading forums and people are claiming there getting a lot better accuracy with the Mdrx side eject 5.56 compared the the old mdr foward eject. Is there a reason for that? I ordered the mdrx in foward eject kinda wish I ordered the side eject if it’s true

    • We have only seen anecdotal evidence about such claims, certainly not enough to substantiate them. I think it is more likely just differences in accuracy from one barrel or rifle to another.

  5. Will you be offering a slimmer handguard in the future that would do-away with the picatinny to allow for a better c-clamp grip? Maybe allow for M-lok all around the guard instead of the picatinny on the top.

  6. Does the new MDRX fix the ejection issues when shooting the 308 as I am STILL having issues even after cleaning it and lubing it and it’s still on the factory gas settings. I have less than 30 rounds through it as it keeps jamming and have been tempted to smooth out the the front eject shoot but don’t want to void the warranty.

  7. Both Sparrow Dynamics and Resurgent Arms offer an alternative grip which may be preferable to the shark fin. What would it take to get that on an MDRX compliant rifle?

Leave a Comment