Very astute observation my friend, I had left my 70 in/lbs t-bar torque wrench in the case when I took the rifle and optics to the gunsmith who was visiting a friend of mine here in COS and asked them to mount the scope (so they used a little more torque saying that 70 was to low and subjects the scope to undue movement when it's jarred). I briefly gave the gunsmith the eye relief rough measurement when I arrived and thats where it was mounted when I return. I have no idea if the relief is workable in its current spot. I just looked for parallax and he just put in a few more (or less) mm's relief and called it good. If I can ever make it to the range with Luna I'm sure we'll have the more correct location after a few black eyes on my part. Thanks again, Amigo, for posting the pics.
Happy Holidays friends,