Silencers, SBR's, and Full-Autos
- Posts: 7
- Joined: Thu Jan 10, 2013 6:25 am
Is anyone using the 3/4 - 24 to 5/8 -24 adapter for their suppressor ?
- Site Admin
- Posts: 60
- Joined: Thu Sep 13, 2012 3:35 am
- Location: Utah, north
I know of several other people who use them on their SRS rifles.
- Site Admin
- Posts: 136
- Joined: Thu Aug 16, 2012 1:46 am
It works ok but I would just rethread the barrel to 5/8 if that is what you need.
- Posts: 137
- Joined: Wed Nov 14, 2012 7:52 pm
Nicholas wrote:It works ok but I would just rethread the barrel to 5/8 if that is what you need.
I agree. Stacking tolerances can bite you.
We can rethread you for $75 if you don't have anyone you work with.
- Posts: 9
- Joined: Wed Dec 11, 2013 7:00 pm
I received my Delta P Design thread adapter three business days after ordering. It is very well machined with a flawless finish. The owner explained to me just how the adapter is machined without compromising the longitudinal axis to minimize any run out. It matches the quality of the DTA both in quality and appearance; I am very pleased with it. So far, too icy to get it out to the range, but soon! Thank you DPD for making this adapter available (for the relatively small / limited market of DTA rifles) to us.