Installing Your HTI Conversion Kit

October 17, 20121 min read

HTI Conversion Kit

Installing your Desert Tactical Arms conversion kit into the HTI chassis is simple and can be done in just a couple minutes.

Take a minute to ensure that everything is installed correctly and ready for shooting.

With the barrel in particular, make sure that:

The recessed notch at the rear of the barrel aligns with the feed ramp when you insert it into the chassis
The positional lug is toggled to the “lock” position
The 4 locking lugs are tightened with the appropriate amount of torque (70 in. lbs for the SRS and SRS Covert chassis, and 80 in. lbs for the HTI chassis)

The HTI chassis also employs a locking catch that you will need to release in order to slide the butt pad to the side and insert your bolt.

Guides
Can Rifles Use Different Calibers?
September 21, 2023
Today, we’re going to explore a question that often crosses the minds of shooters: “Can rifles use different calibers?” Whether you’re a seasoned pro or just getting started, understanding the versatility of your rifle can be a game-changer. So, let’s dive into this topic and uncover the ins and…
Guides
Bore sighting and Zeroing your scope
October 11, 2022
If you are like me, you are frequently swapping scopes back and forth from one rifle to another. As long as you are using a good scope and mounting system this can be a very helpful practice, but also very…
Guides
Is .223 Wylde Better Than 5.56 and .223 Rem?
October 28, 2021
The .223 Wylde chamber is one of those epitomes of the concept of “happy” medium when it comes to shooting. It was born out of a need to balance engineering for accuracy and pressure. The dimensions of a firearm’s chamber, even with the exact same case dimensions, greatly affect how a gun will…